Back to home
Print

MIXING EPS, EPP AND ARCEL BACK INTO THE PRODUCTION AGAIN

 


To optimize the use of recycled material it is very important to have a good product which can be obtained with the KBM recycling systems. Another very important thing is to have a good mixing which can increase the use of recycled material even further.
STYROMIX
The KBM STYROMIX System is for the shape-moulding manufacturers.
STYROMETER
The STYROMETER is for the block-moulding manufacturers.
 
The KBM STYROMETER System is designed to meter and mix the recycled (e.g. from the KBM MINI, MAXI or JUMBO recycling systems) and new EPS material together right before the block mould in the optimal way. The shape moulding the KBM STYROMIX is available.

The KBM STYROMETER is also useful for EPP where it can make an accurate mix of recycled and new EPP just before it enters the pre-pressurizing tank

Each silo contains one material e.g. recycled and new EPS. The speed of the cell wheels  (star wheels) are adjusted steplessly by one mutual potentiometer to set the required mixing ratio. It is also possible to program a number of preset values like (5%, 10% 15% etc.) to simplify the settings. The mixing ratios are from 5 to 95%.
 
The cell wheel principle ensures an accurate mixing/metering independently of the pressure in the silos when they are being refilled by a blower. This is often a problem with screw-feeding systems.

The system can also be delivered for existing silos.
The KBM STYROMIX System is designed to obtain a more accurate metering and mixing of recycled EPS or EPP materials to the new EPS or EPP beads, directly before each individual moulding machine (mounted on or close to each machine). The KBM STYROMETER System is available for the EPS block industry.

The STYROMIX System is suitable for granulated and dust extracted materials from the MINI, MAXI or JUMBO recycling systems. Since the metering/mixing takes place directly before the materials reach the hopper on the moulding machines, the demixing of the mixture is minimized or even eliminated compared to mixing after the preexpander.

The ratio of the recycled material to the new beads is from 0 % to 99 % in steps of 1 %.
The STYROMIX 1 system has an individual control panel.
 
The vacuum to the systems, to suck the material from the storage silos to the moulding machines, is to be provided from the customers existing vacuum system.

The operation is very simple to control from the control panel.

STYROMIX

STYROMETER

CLICK ON THE FLAGS BELOW TO GET THE BROCHURE IN THAT LANGUAGE!

KBM MIXUNIT
KBM STYROMETER

STYROMETER SKETCH

STYROMIX SKETCH

KBM STYROMETER DRAWING
KBM MIXUNIT
We use cookies to help improve our site and your experience. By continuing to use this site you are agreeing to our use of cookies. See our cookie policy
CMS med søgemaskineoptimering og ehandel
KBM ApS - Voelundsvej 13 - DK-3400 Hilleroed - Phone: (+45) 4826 8090 - Fax: (+45) 4826 8016 - E-mail: kbm@kbm.dk            | info