...

Response

within one working day

...

Quality

produced in Denmark

Fill injectors

Injektorking Vario

Adjustable air-consumption makes it possible to fill more in different spots in the mould

Injektorking Vario

MINIMAL AIR CONSUMPTION

By maximum setting on our injectors, air consumption is less than half of the air consumption of most other major suppliers of injectors.

 

VARIO SYSTEM

  • Stepless variable adjustment of the air volume, means that you never need to introduce more air, than you need to fill the mould.

  • Consequently you reduce the need for venting of the mould.

  • Change tip in only 30 seconds to another diameter. Tips are available in all sizes from 18-36 mm.

  • Built-in "blow back on time" after closed function.

 

 

THREE DIFFERENT VERSIONS OF THE INJEKTORKING VARIO - SUITABLE FOR ANY PURPOSE:

Vario EPS:

  • Very low-energy fill injector with adjustable air/vacuum setting
  • Enables you to optimize your energ consumption, while still having a very good filling
  • Perfect for all regular EPS moulding tasks

 

Vario EPS Power:

  • The fill injector designed for more demanding tasks
  • Still a low air consumption and an even higher vacuum ensures a good filling of all difficult parts
  • Also for higher densities of EPS

 

Vario Turbo/Combi (T/C):

  • The fill injector for all materials and densities - EPS, EPP, Arcel, Neopor etc.
  • Same air/vacuum profile as the Vario EPS Power ensures a very good and fast filling

 

 

EXTREMELY LITTLE MAINTENANCE

  • To change all wear parts (2 seals) takes only 3 minutes per injector.

  • To change the U-seal, which is the only seal inside the steam chamber takes 15 seconds.

  • All parts are dismounted by hand without use of special tools. 

  • Designed for use with pressure filling systems, allowing optimal filling, also of thin-walled sections. 

  • Quick clamp for material hose available. Standard for 22 (7/8"), 25 (1") and 32 mm (1 1/4") hoses.  
michael bentzen
Need help?
We got experts...
Request info
michael bentzen
Need help?
We got experts...
Request info

The following images of variants are not a limited selection of KBM Injektorking variants, but act as a purpose of illustration. Please send us a request with your requirements for your mould.

 

INJEKTORKING VARIO EPS:

Injektorking Vario EPS 330/50/22L25/16 (1")
Injektorking Vario EPS 330/50/22L20/16 (1")
Injektorking Vario EPS 230/50/22L25/16 (1")
  Injektorking Vario EPS 230/50/22L30/16 (1")
  Injektorking Vario EPS 330/42/23L25/16 (1")
  Injektorking Vario EPS 330/50/16L25/12 (1")
  Injektorking Vario EPS 330/50/22L30/16 (1")
  Injektorking Vario EPS 330/50/36L25/16 (1")
  Injektorking Vario EPS 430/40/26L30/16/100 (1")
  Injektorking Vario EPS 530/50/22L20/16 (1")
  Injektorking Vario EPS 530/50/22L50/16 (1")


INJEKTORKING VARIO EPS POWER:

Injektorking Vario EPS Power 430/50/24L21/18 (1")
  Injektorking Vario EPS Power 3C/330/50/24L25/20 (1")
  Injektorking Vario EPS Power 330/50/24L25/20 (1")
  Injektorking Vario EPS Power 430EXT/50/20L50/16/E200 (1")


INJEKTORKING VARIO TURBO/COMBI:

Injektorking Vario Turbo/Combi 330/50/22L25/16 (1")
Injektorking Vario Turbo/Combi 330/50/24L21/16 (1")
  Injektorking Vario Turbo/Combi 3C/430/50/24L21/16 (1")
  Injektorking Vario Turbo/Combi 330/50/16L25/12 (1")
  Injektorking Vario Turbo/Combi 330/50/24L30/16 (1")
  Injektorking Vario Turbo/Combi 330/50/24L75/16 (1")
  Injektorking Vario Turbo/Combi 430/50/24L21/16/100 (1")
  Injektorking Vario Turbo/Combi 430/50/24L40/16/100 (1")

 

michael bentzen
Need help?
We got experts...
Request info

Injektorking Vario variants - technical data scheme

Vario EPS

Vario EPS Power

Vario Turbo/Combi (T/C)

Fill Injector 40mm

Fill Injector 42mm

 

 

Fill Injector 42x1,5mm

 

 

 

Fill Injector 50mm

 

 

 

Plunger 12mm

 

 

 

Plunger 16mm 

 

 

 

Plunger 18mm

 

 

 

Plunger 20mm

 

 

 

 

The INJEKTORKING VARIO EPS is calibrated for a minimum of 60 l/min air consumption at 6 bar. This is equal to 159 Nominal l/min.
One position adjustment on the scale is equal to approx. 15 l/min

The Power and TURBO/COMBI versions are calibrated for a minimum of 100 l/min air consumption at 6 bar and a max. air consumption of 260 l/min.
Standard packing: Carton with 12 units.

 

SUBJECT TO ALTERATIONS
michael bentzen
Need help?
We got experts...
Request info
Related Products
Injektorking LS

Fixed air-consumption

Read more

Request more information