De-dusters | Remove dust for best recycling result | KBM ApS
...

Response

within one working day

...

Quality

produced in Denmark

De-dusters

Individual de-dusting units allow you to clean the material after a granulator or pre-crusher.

De-dusters

De-dusting is used to prepare foam materials from granulation/grinding - to ensure that it was possible to mix with new beads before the moulding process.

KBM has supplied these solutions since 1978 and has developed different equipment to refine this process ever since to obtain the optimal de-dusting quality.

Today, it is often necessary to de-dust in other locations in the moulding process. The raw material (virgin beads) is often full of small particles and fine dust, and it is very important that these particles are removed before the moulding process.

Why you should be de-dusting

De-dusting must be done to:

  • Increase the quality of the moulded pieces (shape moulded or block moulded)
  • Avoid production stops caused by dust sticking to the moulds and with a lot of maintenance work as the result.
  • Increase the rate of recycled material that can be added and re-used.

KBM has for many years been manufacturing the MINI, MAXI, and JUMBO recycling systems with vacuum dedusters. These products have capacities like 10 m3/h, 18-20 m3/h, and 35-40 m3/h. Lately a larger version JUMBO+ was developed to give 50-60 m3/h. This unit has now been developed further into the GIANT 120 and GIANT 240 with capacities of 100-120 m3/h and 200-240 m3/h for the large block moulds.

With the variety in capacity from 10 m3/h up to 240 m3/h KBM is able to supply for all purposes of de-dusting: recycled or virgin - or after it is mixed.

To keep the quality and efficiency high and maintenance of the de-dusting systems on a minimum, KBM has developed a cyclone venting system for the extracted dust. The cyclone removes the dust form the de-dusting air. The collected dust is compacted to avoid large volumes of waste. The air is returned in a “closed loop” and reused in the system instead of venting it through filter bags which require a lot of maintenance.

michael bentzen
Need help?
Ask an expert
Request info
Deduster EPS/EPP Recycling machinery for filtering out dust

KBM De-duster/Dust separation unit 

Technical overview of the De-duster

michael bentzen
Need help?
Ask an expert
Request info

KBM De-dusters capacity values:

Capacities  m3/hour Cubic feet/hour 
MINI de-duster 8-10 280-350
MAXI de-duster 18-20  630-700 
Maxi + de-duster 25-30  875-1050 
JUMBO de-duster 35-40  1225-1400 
JUMBO + de-duster 50-60  1750-2100 
GIANT 120 de-duster 100-120  3500-4200 
GIANT 240 de-duster 200-240  7000-8400 
SUBJECT TO ALTERATIONS
michael bentzen
Need help?
Ask an expert
Request info
Related Products
Pre-crushers

Individual pre-crushers secure flexible and fast pre-handling of material.

Read more

Dust compactors

The KBM Dust Compactors reduce the volume of material dust 20-30 times - as well as reduce the cost of your …

Read more

Micro-In-A-Box

The KBM Micro In-A-Box is a Plug & Play unit - easy to install. It is a complete recycling system in one…

Read more

Request more information