Response
within one working day
Quality
produced in Denmark
Styrometer
The KBM Styrometer is designed for EPS block moulders and/or for EPP mixing before the pre-pressurizing tank.
within one working day
produced in Denmark
The KBM Styrometer is designed for EPS block moulders and/or for EPP mixing before the pre-pressurizing tank.
The KBM Styrometer system is designed to meter and mix the recycled and new material together right before the block mould to minimize de-mixing.
Each silo contains one material e.g. recycled and virgin material. The speed of the cell wheels (airlocks) is steplessly adjustable from 5% to 95% with one mutual potentiometer to set the required mixing ratio. It is also possible to program a number of preset ratios (5%, 10%, 15%, etc.) to simplify the settings. The cell wheel (airlock) principle ensures an accurate mixing/metering independently of the pressure in the silos when they are being refilled by a blower. This is a problem by the screw-feeding systems.
The system can also be delivered for existing silos.
 |
KBM Styrometer - For mixing EPS and EPP etc. (for block-moulds or for pre-pressurizing tanks) |
 |
KBM STYROMETER sketch - A mixing station to ensure an accurate mixing of EPS recycled material and new beads just before the blockmould. Either directly into the blockmould or to the blockmould feeding silo. Also for mixing EPP materials before the pre-pressurizing tank. |
| STYROMETER | MINI | MAXI | JUMBO | GIGANT |
| Capacity (m3/h) | 30 | 100 | 180 | 300 |
| Capacity (CuFt/h) | 1000 | 3333 | 6000 | 10000 |
| STYROMETER | MINI | MAXI | JUMBO | GIGANT |
| Height | 6.0 | 6.0 | 6.0 | 6.0 |
| Width | 2.0 | 3.0 | 4.0 | 5.0 |
| Length | 2.0 | 3.0 | 4.0 | 5.0 |
| Electrical load | Up to 3 KW | Up to 3 KW | Up to 3 KW | Up to 3 KW |
